Wyze Apartment Basics Kit: Setup Guide for Renters

By Wyze | Published: 2026-10-26

Category: How-to Guides

Get a clear breakdown of what's inside the Wyze Apartment Basics Kit and step-by-step setup instructions for renters seeking easy, no-drill security.

Quick answer

The Wyze Apartment Basics Kit includes a Wyze Battery Video Doorbell and a Wyze Cam Pan v3—both battery-powered and installation-free—making it ideal for renters who want reliable security without permanent changes.

Why choose the Apartment Basics Kit over individual devices?

Buying the kit saves you about $35 compared to purchasing the doorbell and pan camera separately, and you get everything in one box with a single setup process. The trade-off is that you cannot customize which devices are included—you get these two specific models.

Battery life and recharging considerations

Both devices run on rechargeable batteries. The Video Doorbell typically lasts 3-6 months per charge depending on activity, while the Pan v3 lasts 1-3 months. Plan to recharge every few weeks to months, and note that continuous panning will drain the camera battery faster.

Setup decision rules

Unbox and charge: Remove both devices from the box. Charge the Video Doorbell and Cam Pan v3 using the included USB cables until the LED turns solid blue—this takes about 4-6 hours. Do not skip the initial full charge; partial charging may cause early low-battery alerts.
Download and create account: Install the Wyze app on your phone, create an account, and grant location permissions so the app can detect your devices during setup.
Add the Video Doorbell: In the app, tap 'Add Device' > 'Battery Video Doorbell'. Press the sync button on the doorbell until the LED blinks blue, then follow in-app pairing instructions. Mount the doorbell using the included adhesive strip—no screws needed. Place the doorbell at eye level for best head-to-toe view. Test the angle before sticking permanently.
Add the Cam Pan v3: In the app, tap 'Add Device' > 'Cam Pan v3'. Press the sync button on the camera base until the LED blinks blue, then complete pairing. Place the camera on a flat surface or use the included stand for 360° panning. Position the camera where it can swivel freely—avoid corners that limit its pan range.
Configure motion zones and alerts: In the app, set up motion detection zones for each device to reduce false alerts. Adjust notification sensitivity and schedule quiet hours if needed. Start with a small motion zone and expand after a day—this prevents alert fatigue.

What's inside the kit

Apartment Basics Kit: Perfect for renters, the Apartment Basics Kit gives you easy home security without drilling, wiring, or permanent installation. Both devices are fully battery-powered, making setup simple and landlord-friendly. You can install the system in minutes without tools or wall mounts, and remove it just as quickly when you move out.
Apartment Basics Kit

Is this kit right for you?

Best for

Renters who cannot drill or wire permanent devices
People who want a simple two-device system for front door and main room coverage
Budget-conscious buyers looking for a bundle discount

Not ideal for

Users who need outdoor cameras (the Pan v3 is indoor-only)
Those who prefer continuous recording over event-based clips (battery limits recording)
Large homes requiring multiple cameras or sensors